00T0T_juvQaXXIGm8_0ak07K_600x450
  • 15 June 2020 10:37
$0

These pieces have been in my collection for a long time and have always been working whenever I want to listen to them. The time has come to start letting go of a few items, so I am trying CL and FB Marketplace to avoid seller fees and shipping; for now. I will have everything connected and ready to be enjoyed, when someone comes to take a look. I will not venture far from the price that I have set. So lets deal, and not haggle. If you are looking, you know what they truly are!
Call for a faster response: Two48-820-430Four

Hafler DH-200 Power Amplifier – 100 watt per channel
Specifications :
Output Power Less than 0.02% THD at any power level up to 100 watts per channel, both channels driven continuously, from 20-20,000 Hz.1.5 V RMS input for 100 watts into 8Ω.
Audio Output Connectors:
Standard 5-way binding posts on standard 3/4″ centers.
SMPTE Intermodulation Distortio:
< 0.005% from 1 - 100 watts into 8Ω.
THD at 100 WPC into 8Ω (typical):
1 kHz: 0.0015%
10 kHz: 0.005%
20 kHz: 0.012%
Frequency Response into 8Ω:
10 – 40,000 Hz at 100 watts ±0.5 dB.
1 – 100,000 Hz at -3 dB at 1 watt.
Signal to Noise Ratio:
>100 dB unweighted, referred to 100 watts.
Damping Factor:
150 at up to 1 kHz into 8Ω.
50 at up to 10 kHz into 8Ω.
Rise Time:
2.5 µS from 10% to 90% with a 60 V p-p 10 kHz square wave.
Slew Rate:
30 V/µS with a 60 V p-p 10 kHz square wave.
Semiconductors:
8 power MOSFETs: two pairs of complementary Hitachi 2SK134 and 2SJ49 lateral MOSFETs per channel.
Each of these power MOSFETs was individually tested, graded and sorted by Hafler. Each was stamped with a number from one to five and assembled accordingly into amplifier modules.
26 transistors.
24 diodes.
4 Zener diodes.
1 bridge rectifier.

Kenwood KC-208
Total harmonic distortion : 0.004% [20Hz to 20kHz, Aux in to speakers at 1V output]
-:®:- Frequency response : 10Hz to 70kHz +0dB, -3dB, phono: 20Hz to 20kHz ±0.3dB
-:®:- Signal to noise : Phono: 79dB for 2.5mV input, Line: Tuner / Aux / tape: 103dB
-:®:- Input sensitivity / impedance : Phono: MM: 2.5mV at 47kohms, Tuner / Aux / tape: 150mV at 33kohms
-:®:- Tone controls : Graphic equalizer: 60Hz, 150Hz, 400Hz, 1kHz, 2.4kHz, 6kHz, 15kHz ± 10dB subsonic: 6dB/octave at 18Hz
-:®:- Dimensions [W x H x D]: 420 x 89 x 273mm
-:®:- Weight : 3kg, packed weight : 4.5kg

see on craigslist

Location

Leave a Review